| After-sales Service: | Free Parts and Technician Support |
|---|---|
| Warranty: | 18 Months |
| Driving Type: | AC Elevator |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Products name | Model | Speed(m/s) | |||||
| Passenger elevator |
TKJ-JXW(VVVF) | 2.00 | 800 | 1000 | 1250 | ||
| 1.75 | 630 | 800 | 1000 | 1250 | |||
| 1.60 | 630 | 800 | 1000 | 1250 | |||
| 1.00 | 630 | 800 | 1000 | 1250 | |||
| Small machine room Passenger elevator |
TKJS-JXW(VVVF) | 2.00 | 800 | 1000 | 1250 | 1600 | |
| 1.75 | 630 | 800 | 1000 | 1250 | 1600 | ||
| 1.60 | 630 | 800 | 1000 | 1250 | 1600 | ||
| 1.00 | 630 | 800 | 1000 | 1250 | 1600 | ||
| 3.00 | 1000 | 1250 | |||||
| 2.50 | 800 | 1000 | 1250 | ||||
| Machine room less Passenger elevator |
TKJW-JXW(VVVF) | 1.75 | 630 | 800 | 1000 | ||
| 1.60 | 630 | 800 | 1000 | ||||
| Running Function | ||
| Vvvf drive | Motor rotating speed can be precisely adjusted to get smooth speed curve in lift start, travel and stop and gain the sound comfort. | S |
| Vvvf door operator | Motor rotating speed can be precisely adjusted to get the more gentie and sensitive door machine start/stop. | S |
| Independent running | The lift can not respond to outer calling, but only respond to the command inside the car through the action switch. | S |
| Automatic pass without stop | When the car is crowded with the passengers or the load is close to preset value, the car will automatically pass the calling landing in order to keep maximun travel efficiency. | S |
| Automaticlly adjust door opening time | Door-open time can be automatically adjusted according to the difference between landing calling or car calling. | S |
| Reopen with hall call | In the door shutting process, press reopen with hall call button can restart the door. | S |
| Express door closing | When the lift stops and opens the door, press door-shut button, the door will be closed immediately. | S |
| Car stops and door open | The lift decelerates and levels, the door only opens after the lift comes to a complete stop. | S |
| Car arrival gong | Arrival gong in the car top announces that the passengers arrive. | S |
| Command register cancel | If you press the wrong floor command button in the car, twice continuous pressing of the same button can cancel the registered command. | S |
| Anti-nuisance | In the light lift load, when three more commands appear, in order to avoid the unnecessary parking, all the registered callings in the car will be cancelled. | O |
| Open the door in advance | When the lift decelerates and enters into door open zone, it automatically opens the door to enhance the travel efficiency. | O |
| Direct parking | If completely accords with distance principle with no crawling in the leveling. It greatly enhances the travel efficiency. | O |
| Group control function | When three or more same model lift groups are controlled in use, the lift group can automatically choose the most appropriate response. It avoids the repeated lift parking, reduces the passengers' waiting time and increases the travel efficiency. | O |
| Duplex control | Two sets of same model lifts can unanimously respond the calling signal through the computer dispath. In this way, it reduces the passengers' waiting time to the greatest extent and enhances the travel efficency as well. | O |
| On-duty peak service | Within the preset on-duty time, upward transport fromthe home landing is extremely busy. The lifts are continuously dispatched to the home landing in order to satisfy on-duty peak service. | O |
| Off-duty peak service | Within the preset off-duty period, the lifts are continuously dispatched to top floor in order to satisfy off-duty peak service. | O |
| Door open time extending | Press special button in the car, the lift door keeps open for certain period of time. | O |
| Human-machine interface | ||
| Micro-touch button for car call and hall call | Novel micro-touch button is used for operation panel command button in the car and landing calling button. | S |
| Floor and direction indicator inside car | The car shows the lift floor location and current travel direction. | S |
| Floor and direction indicator in hall | The landing shows the lift floor location and current travel direction. | S |
| Voice announcer | When the lift normally arrives, voice announcer informs the passengers about the relevant information. | O |
| Car assistant operation box | It is used in the large loading weight lifts or the lifts with crowded passengers so that more and more passengers can use the car. | O |
| Operation box for the handicapped | It is convenient for the wheelchair passengers and those who have vision problems. | O |
| Intelligent calling service | The car command or hoist-way calling can be locked or connected through special intelligent input. | O |
| IC card control function | All(partial) landings can only input car commands through IC card after the authorization. | O |
| Safety Function | |
| Photocell Protection | In the door open and shut period, infrared light that covers the whole door height is used to probe the door protection device of both the passengers. |
| Designated stop | If the lift can not open the door in the destination floor out of some reason, the lift will close the door and travel to the next designated floor. |
| Overload holding stop | When the car is overload, the buzzer rings and stops the lift in the same floor |
| Anti-stall timer protection | The lift stops operation due to slippery traction wire rope. |
| Start protection control | If the lift does not leave door zone within the designated time after it gets started, it will stop the operation. |
| Inspection operation | When the lift enters into inspection operation, the car travels at inching running. |
| Fault self-diagnosis | The controller can record 62 latest troubles so as to quickly remove the trouble and restore the lift operation. |
| Repeated door closing | If the lift can not close the door due to certain obstacle or interference, the lift will reopen or re-shut the door until sundries are eliminated. |
| Up/down over-run and final limit protection | The device can effectively prevent from the lift's surging to the top or knocking the bottom when it is out of control. It results in more safe and reliable lift travel. |
| Down over-speed protection device | When the lift downs 1.2 times higher than the rated speed, this device will automatically cut off control mains, stop the motor running so as to stop lift down at over-speed. If the lift continues to down at over-speed, and the speed is 1.4 times higher than rates speed, safety tongs act to force the lift stop in order to ensure the safety. |
| Upward over-speed protection device | When the lift up speed is 1.2 times higher than rates speed, the device will automatically decelerate or brake the lift. |
| Energy saving | ||
| Car ventilation, light automatic shut off | If there is no calling or command signal within the stipulated time, the car fan and lighting will be automatically closed in order to save the energy. | S |
| Remote shut-off | The lift can be called to main landing(after finishing the service) through the key switch and automatically exists the service. | S |
| Emergency function | ||
| Emergency car lighting | Emergency car lighting automatically activated once power failure. | S |
| Inching running | When the lift enters into emergency electric operation, the car travels at low speed inching running. | S |
| Five way intercom | Communication amid car, car top, lift machine room, well pit and rescue duty room through walkie-talkie | S |
| Bell | In emergency conditions, if bell button above car operation panel is continuously pressed, electric bell rings on top of the car. | S |
| Fire emergency return | If you start key switch in main landing or monitor screen, all the callings will be cancelled. The lift diectly and immediately drives to the designated rescue landing and automatically opens the door. | S |
| Leveling when power failure | In normal power failure, the chargeable battery supplies the lift power. The lift drives to the nearest landing. | O |
| Monitor function | ||
| Remote monitor | The lift long-distance monitor and control can be fulfilled through modem and telephone. It is convenient for the factories and service units to timely know the travel conditions of every lift and promptly take the corresponding measures. | O |
| Remote control | The lift can have independent travel according to the specific requirements through operation monitor screen(optional). | O |
| Camera function in the car | The camera is installed in the car to monitor the car conditions. | O |
1.Advanced control technology
The all computerized data network system of General series passenger elevator fully demonstrates the intelligence of humanity, with the function more perfect and flexible. The 32 digit double CPU and the inter-monitor of principalsubordinate CPU have increased the speed of data processing in a great extent. The highly intellectual micro-computer module inside the system implements the most secure, accurate and effective management and control to the elevator running.
2. Advanced network technology
General Elevator applies the most advanced lift network technology in the world. It can fulfill wired or wireless local (residential quarter) motor and long distance monitor.
3. Intellectual integrated group control system
At present, intellectual group control system is the most advanced lift group control technology in the world, the system uses the finest calculation to calculate when and which computer are the most prompt, economical and reasonable to respond the calling signal. In this way, the most proper lift can be distributed to respond the calling. It greatly enhances the efficiency, reduces the waiting time of the passengers and savings the electric energy.
4. Image processing recognition technology
As for the confidential and highly secure lifts, General Elevator applies the comprehensive recognition technology such as magnet card, fingerprint and retina etc. to ensure the users` security and let you work in comfort and safety.
5. Low noise execution system
General Elevator adopts low noise execution unit to avoid the action noise from the traditional contactor and grant the users to enjoy a quiet ,green and graceful life.
6. Door-lock sealing test protection technology
The elevator accidents of injure the passenger are caused by the door-lock sealing. General Elevator adopts micro-computer scan test technology to prevent from the injury accident out of door-lock sealing.
Shipment & Package
General Elevator Co., Ltd., founded in 2003, is currently a new and burgeoning enterprise in the elevator industry which integrates the research, development, manufacture, sale, installation and maintenance. Our company is located in Suzhou City, Jiangsu Province, with charming scenery. Our company covers a total area of over 60,000 square meters and the greening rate in the Zone is more than 40%. Our company has graceful working environment, complete facilities, and distinctive styles of office areas. Every employee and every person that visits and investigates our company can be relaxed and comfortable in such kind of remarkable environment. Our company follows "three high" development ideas - "high input, high-level talent, high-grade products". We have developed a very dedicated team. Our company introduces high-precision, high intelligence and multi-function CNC punching and shearing machines, folding bending machines and other equipment from abroad. We commonly utilize CAD, CAM, and CAPP auxiliary design and developing systems. We introduce the advanced technology and rich and practical experience from the United States. Our company uses the international advanced production and processing techniques to fulfill the technological transfer and the overall frame quality input. We demonstrate a noble and perfect European and American style. In this way, we can produce humane, intellectual and high-tech products. At present, General Elevator has medium and high grade passenger elevators, panorama elevators, hospital elevators, goods elevators, service elevators, escalators, moving-walk and automobile elevators. Our company has various forms of elevators with machine rooms as well as small machine room elevators and machine room-less elevators. Specification Loading capacity from 200 kg to 5T; speed from 0.2M/S to 3M/S We can meet the different needs of customers. General Elevator Co., Ltd. has won the praises of many customers by cost-effective and unique managing ideas, the flexible sales policy and the personalized "6S Gold Diamond service". Our company is developing in leaps and bounds. At present, we become a black horse in the elevator industry. Up to now, our company has set up a great number of branches and cooperated with many agents in vast domestic cities. Our sales and service network systems are widespread all over the country. Facing the opportunities and challenges of the integration of world economy, General Elevator will make an all-out effort to serve the society and to contribute to the convenience of the vertical public transport! Our company tries the best to construct a new concept of the Chinese elevators and builds up the domestically first-class and the international famous elevator brand.
1.who are we?
){kind=link}